The machine width adjustment system adopts dual linear guide rails and high-precision helical gear rack mechanism (DIN6 grinding level);
Servo motor drive, high adjustment accuracy;
The opening and closing speed can reach 25m/min, and the repeated positioning accuracy can reach ± 0.05mm.
The conveying roller shaft of the glass rotary table is made of 304 stainless steel.
The clamping frame and upper 45° chamfer lifting adjustment are controlled by servo motors, with high control accuracy and fast and accurate positioning.
1、It is possible to quickly and accurately allocate and adjust the grinding amount of each grinding wheel.
2、It can achieve automatic compensation for grinding wheel loss to ensure that the grinding wheel operates in the set state.
3、It can obtain the loss status of each grinding wheel, and when the loss reaches a certain percentage, an alarm will notify the user to replace the grinding wheel.
4、It is possible to obtain the number of grinding edges per grinding wheel, which facilitates comparing the durability of different grinding wheels.
5、The system provides a grinding formula function, which automatically adapts the detailed distribution of grinding amount corresponding to the thickness of the glass as a condition. No manual intervention is required for switching, and the system will automatically switch based on the obtained glass thickness.
6、Due to the loss of the grinding wheel, the allocation is digitized. After the user changes the grinding wheel, with just one click operation, the edge grinding machine can quickly resume normal operation and production. Compared to the replacement grinding wheel operation of the servo less feed edge grinding machine, it is faster and more accurate.
Company E-mail
[email protected]Comapny Address
1-2/F, Workshop 1 and Office Building,
