With the development of technology, people are not only able to fully utilize the natural advantages of glass, but also able to adjust its performance and make up for its shortcomings. Let's take a look at how to use a glass edging machine and the processes required for homemade glass

Precautions when using a double-sided edge grinding machine

① The bilateral edge grinding machine is a relatively inferior edge grinding machine, and it is recommended to have two to three people fixed for operation to ensure correct operation

② When there are errors or malfunctions in the program of the bilateral grinding machine, it is recommended to ask the original manufacturer to send personnel for repair and debugging. Generally, do not disassemble or repair to avoid disrupting the program and causing production stoppage

Precautions for using glass straight edge grinding machine:

The working mode of linear edge grinding machines (straight edge machines, circular edge machines, and bevel edge machines) is to grind the glass by clamping it with front and rear pressure plates and driving it to move in a straight line
Two points must be noted during use:

① The joint surface between the front and rear pressure plates and the guide rail should be lubricated regularly, otherwise it may affect the normal service life of the machine due to premature wear of the front and rear pressure plates and the working surface of the guide rail. Although some models have automatic lubrication devices, it is also necessary to regularly check whether the lubrication pipeline is smooth

② When clamping glass, the clamping force should be appropriate. If it is too loose, it will affect the grinding quality. If it is too tight, it will increase the machine load and easily cause shaking and crawling. When grinding thin glass, it is also easy to crush the glass

The clamping force can be tested by clamping a slightly larger piece of glass onto the machine, that is, placing the glass in the middle of the machine and using both hands to forcefully move the glass while the machine is stopped. It is appropriate to adjust the clamping force to just the point where both hands cannot move it

Article by: High speed double-sided machine, glass double-sided machine http://aoama.cn Provided by Foshan Yuanbo Intelligent Technology Co., Ltd., this article does not represent the views of this website