1. Wear protective equipment such as gloves and protective glasses

     2. Adjust the grinding amount, thickness, and width of the coarse and fine wheels according to the glass to be processed

     3. Turn on the power switch (turn on the key switch)
     4. Press the water pump button to observe whether the water pump is started and whether the position of the cooling water nozzle is suitable

     5. Press the grinding head motor button and observe whether each grinding head motor is started, whether the working motor is normal, and whether the steering meets the regulations

     6. Turn the conveying direction knob to the feeding direction, and adjust the air pressure valve to 0.2-0.22.

     7. Place the glass to be processed on the feeding rack support wheel, push it into the feeding rack, and between the support wheels, it is synchronously transported into the upper and lower clamping sections by the feeding. Both sides are roughly and finely ground and polished, and processed in sequence to form the processed glass. Remove it from the discharge rack
Article by: Glass bilateral machine http://aoama.cn Provided by Foshan Yuanbo Intelligent Technology Co., Ltd., this article does not represent the views of this website