? 1. For various newly purchased edge grinding machines, it is necessary to read the user manual before use. After understanding the transmission principle of the machine, the functions of various handles, handwheels, electrical buttons, water and air circuit control valves, and mastering the maintenance knowledge of the machine, you can only operate the machine._2. The quality of the grinding head of the glass edge grinding machine has a significant impact on the grinding quality of the glass. The position and movement clearance of the grinding head have been adjusted before leaving the factory. When using, except for the forward and backward grinding heads, the rest should generally not be moved to avoid affecting the grinding quality. In addition, the backward position of the grinding head should not be too large, otherwise it is easy to damage the waterproof sleeve, cause water leakage, and easily burn the motor
3. Adequate cooling also has a significant impact on the grinding effect. Regularly check the cooling pipes for blockages. Especially, the pipeline of the linear edge grinding machine is easily blocked by bristles, and it is not easy to detect the blockage, which can cause insufficient cooling and affect the quality of the edge grinding
4. The stepless transmission used in the edging machine must be in the open state when adjusting the speed, otherwise the continuously variable transmission of the edging machine will be easily damaged
All preparations have been made in advance, and there may be other factors:
1. Manufacturing (process) factors: Although the design is correct, due to the inability of the manufacturing conditions to meet the design requirements, various equipment failures occur, resulting in failure. Cracks during the forging process; Loose and slag inclusions caused by incomplete welding, cold and hot cracking during the welding process; The dimensional tolerance and surface roughness of mechanical processing are not suitable; Defects in heat treatment processes, such as quenching cracking, temper embrittlement, structural defects in the hardened surface layer, insufficient hardness, and excessively thin hardened layer; Fine machining, grinding, cracks, etc
1. There is a quality design issue with the glass edging machine. Although the process of the edge grinding machine is reasonable, various equipment failures can lead to failure due to manufacturing conditions that cannot meet the design requirements. Cracks during the forging process; The welding process was not welded in place, resulting in hot and cold cracks, porosity, and slag inclusion in the casting; Processing tolerances and surface roughness are not appropriate; Defects during heat treatment, such as cracks, temper embrittlement, and hardened surface defects, hardness, and excessively thin hardened layer; Fine grinding cracks. So how should we choose a glass edging machine correctly? Please click on the details to view the precautions
2. The material selection factor of the edge grinding machine is that the materials used for the equipment's components do not meet the technical conditions, and the internal defects of the materials are essentially the source of stress concentration inside. Under external loads, material defects exhibit high stress, leading to certain types of failure. The failure caused by the material may be due to improper design and material selection; It may also be caused by defects in the cold and hot processing (especially heat treatment) process of the blank, as well as improper installation and commissioning
3. The factors affecting the operation and maintenance of the machine are first the monitoring of operating conditions parameters (load, speed, etc.) to see if they meet the specified requirements. In addition, lubrication conditions are also an important factor. The lubrication conditions usually include: whether the lubricant and lubrication method are selected appropriately, whether the lubrication device, cooling, heating, and filtering system functions properly, which is also a daily maintenance issue for glass edge grinding machines
Article by: Glass bilateral machine http://aoama.cn Provided by Foshan Yuanbo Intelligent Technology Co., Ltd., this article does not represent the views of this website
