1. Before starting work, check the equipment and ensure that the glass edging machine is in normal condition
2. Operators must wear gloves and masks or dustproof equipment. The doors and windows of the work area should be closed to prevent the escape of silica dust. The ventilation and dust removal device must be intact and effective
3. Precautions for pre operation inspection of glass edging machine:
(1) The clamping nut of the grinding wheel shall not be loose
(2) The grinding wheel shall not have cracks or notches

(3) The safety cover is fully and reliably assembled

(4) The front and rear, upper and lower transmission handles operate flexibly, and there is no noise during operation
4. When grinding the edge of the steel plate, the adjustment size of the grinding wheel should be strictly controlled, and the grinding amount should not be too large at once to avoid causing the steel plate to be worn out and the grinding wheel to break
5. If the glass edging machine malfunctions during edging, such as the steel plate getting stuck, the main switch should be immediately turned off, and the steel plate should be removed after parking
6. Pay attention to checking the motor for heating and abnormal operation at any time during production
7. Stacking steel plates (especially cold rolled and oil coated plates) should be neat, not tilted, not higher than 1.2 meters, and should not collide with each other to avoid slipping and injuring people
8. Steel plates for feeding and transportation should be held firmly and placed upright, and should not be thrown randomly to avoid injury
When the ventilation and dust removal device fails, it should stop working or take measures

10. After completing the work, turn off the switch and do a good job of cleaning

Article by: Glass bilateral machine http://aoama.cn Provided by Foshan Yuanbo Intelligent Technology Co., Ltd., this article does not represent the views of this website