CNC glass edging machine grinds the edges and corners of glass into powder, making it smoother. However, a large amount of these splashed powder is adsorbed on the glass edging machine every day. So, after the end of each day's work, it is necessary to reasonably remove the glass powder adsorbed on the glass grinding machine

    Long term processing of CNC glass grinding machine can cause cutting dust to adhere to the clamping axis, clamping head, and grinding chamber wall. If not removed in a timely manner, it can scratch the lens and cause wear of the sealing ring of the clamping axis, leading to water ingress into the machine head. Clean directly with a brush and water spray container. Enter machine cleaning mode for cleaning. This method can also clean the internal water supply pipeline of the machine

     When cleaning, it is necessary to follow the operating standards and operate safely and reasonably. Moreover, due to the fact that the CNC glass grinding machine is rotating every day, lubrication and maintenance are also of utmost importance. It is necessary to regularly protect the lubrication of the mechanical shaft so that the glass grinding machine can work more smoothly. This can not only increase the efficiency of CNC glass edge grinding machines. And it can also increase the production volume of the company/factory. Moreover, due to proper daily maintenance, the service life of the CNC glass edging machine can be sufficiently extended. Indirect cost savings for the company/factory. Clean the grinding chamber

Article by: Glass bilateral machine http://aoama.cn Provided by Foshan Yuanbo Intelligent Technology Co., Ltd., this article does not represent the views of this website