(1) Cleaning and drying: first, clean the flat glass to produce Frosted glass with water to remove dust and stains, and then dry it
(2) Hoisting: Install the cleaned and dried flat glass onto a lifting frame, and use a toothed rubber support to pad the contact part between the lifting frame and the glass. The glass is arranged vertically, with a certain distance between the glass and the glass, and lifted by a crane
(3) Corrosion: Use a crane to immerse the flat glass together with the hanging frame into the corrosion box, and use conventional corrosion solution to immerse the glass for 5-10 minutes. After lifting with a crane, rinse off the residual liquid
(4) Softening: after leaching the residual solution, a layer of residue is attached to the Frosted glass, which is put into the softening box for softening. The glass is immersed in conventional softening solution for 1-2 minutes to remove the residue
(5) Cleaning: The frosted glass body has a lot of chemicals due to corrosion and softening, so it must be cleaned. Put Frosted glass on the slide of the washer, and the slide drives Frosted glass into the washer. The washer sprays clean water while rotating the brush. When Frosted glass is taken out of the washer by the slide of the washer, the Frosted glass cleaning is completed
(6) The cleaned Frosted glass is put into the drying room for drying, which is single or double sided Frosted glass Article by: Glass bilateral machine http://aoama.cn Provided by Foshan Yuanbo Intelligent Technology Co., Ltd., this article does not represent the views of our website.
?2000 FOSHAN YUANBO INTELLIGENTT TECHNOLOGY CO., LTD. All Rights Reserved | Some of the images on this website are sourced from the internet. If there are copyright issues, please inform us to delete them according to the contact information published on the website.
