As a necessary machine for deep processing of glass, the double sided glass machine is relatively large in appearance, so its price is also relatively high< Now, I would like to share with you the details of purchasing glass edge grinding machines, where to start observing and checking whether the quality of the glass double-sided machine is reliable

Firstly, let's review the basic structure of the glass edging machine. The main unit, inlet and outlet guide rails, glass brackets, and floor water tanks are the basic components. The host can be divided into front beam, rear beam, base, column, motor, electric box, and grinding wheel water tank
This way, you can clearly know where to start the quality inspection of the glass bilateral machine before purchasing. The standard quality requirements require that the front and rear crossbeams must be flat and have wear resistance, heat resistance, and oxidation resistance, so that the glass edging machine will not deform during high-temperature operation. Moreover, as the load-bearing position of the glass edging machine, the base also needs to have the same performance as the front and rear crossbeams to ensure the quality of glass edging. At the same time, edge grinding machines have high requirements for grinding heads, and the quality of the grinding heads directly affects the quality of glass after deep processing

From years of maintenance and repair experience, it is necessary to pay special attention to all parts when purchasing a glass double-sided machine, especially those with high requirements for wear resistance and oxygen resistance. They need to be castings, and welding parts need to be particularly rigid. In order to ensure that the grinding machine has no major faults, parts separation, looseness, etc. during long-term use

Finally, you need to pay special attention to the motor. The motor shaft has high jumping accuracy and strong waterproof ability, which can better ensure the quality of glass deep processing. The thickness of the glass bilateral machine motor grinding disc and the quality of the motor itself are both constraints. The cost of thick grinding plate is much higher than that of thin plate, so it is necessary to pay attention to inspection. Suggest buying a motor made of copper wire, with better bearings and high waterproof performance
Article by: Glass bilateral machine http://aoama.cn Provided by Foshan Yuanbo Intelligent Technology Co., Ltd., this article does not represent the views of this website